GOINGMAKE guides
Set the jig up right once and it repeats for years: slot fit, fence length, rip widths, hinge offsets and hole spacing, in figures.
How to choose a table saw miter gauge: slot, fence length and angle stops
Measure your miter slot, match the fence to your saw and your widest crosscut, and know what positive angle stops and a micro-adjust flip stop do.
Read the guide
Thin strips and repeat rips: a thin rip jig on the table saw, a parallel guide on the track saw
Why thin strips fall on the outside of the blade, how a thin rip jig sets each one, and how a parallel guide makes a track saw rip sheet goods to width.
Concealed cabinet hinges: boring the 35 mm cup, setting the offset, hanging the door
How a 35 mm cup hinge sits in a door, what the offset setting changes, how a hinge jig bores the cup and the screw holes, and how to hang the door level.
Pocket holes, dowels and dog holes: drilling with a jig instead of by eye
When a pocket screw, a dowel or a shelf pin is the right joint, how each jig sets its holes, and how to drill a 20 mm or 3/4 in dog-hole grid in a bench top.