GOINGMAKE Small Miter Gauge, 12 to 21 in
Jobsite-size gauge whose fence reaches 21 in.
- Fence
- Extends 12 to 21 in
- Miter bar
- 12 in, adjustable rings
- Angle stops
- 11 positive stops: 90, 60, 45, 30, 22.5, 15 and 0° each side
- Scales
- Inch and mm, laser engraved
Description
Description
Jobsite table saws have a short table, and that is where a 12 in bar earns its keep. The Small Miter Gauge, 12 to 21 in, rides on that short bar yet carries a fence that extends from 12 in to 21 in. Trim boards and stair parts get support well past the blade, even on a saw that travels in the back of a truck.
Note the size before ordering: this is our small gauge, made for compact saws. Adjustable rings fit the 12 in bar to a 3/8 x 3/4 in T-slot or U-slot. Once they are set, the bar slides with no play, and a square crosscut stays square from one end of a board to the other.
Eleven positive stops at 90, 60, 45, 30, 22.5, 15 and 0° each way handle common miters, with pre-set metal stops meeting a plastic locking handle. Inch and mm scales are laser engraved along the fence. A flip stop zeroes to the blade, so repeat lengths come from the scale instead of a pencil mark.
Specifications
The GOINGMAKE Small Miter Gauge, 12 to 21 in, by the numbers
| Fence | Extends 12 to 21 in |
|---|---|
| Miter bar | 12 in, adjustable rings |
| Angle stops | 11 positive stops: 90, 60, 45, 30, 22.5, 15 and 0° each side |
| Scales | Inch and mm, laser engraved |
| Fits | 3/8 x 3/4 in T-slot or U-slot |
| Material | Aluminum alloy |
| Model number | 0122B |
The Small Miter Gauge, 12 to 21 in sits with 8 other jigs on the miter gauges shelf of GOINGMAKE jigs and guides.
Questions
Questions about the GOINGMAKE Small Miter Gauge, 12 to 21 in
Will the GOINGMAKE 12 in bar sit fully on your jobsite saw table?
Measure your table from the front edge to the blade along the slot. If it is 12 in or more, the bar of the Small Miter Gauge, 12 to 21 in, stays supported for the whole cut.
Why choose the extending GOINGMAKE small gauge over the fixed 12 in one?
The extension takes the fence from 12 to 21 in for longer trim and shelving, on the same small bar. If your parts stay short, the fixed 12 in gauge is simpler to carry.
A table saw cuts fingers as easily as wood. The agencies below put the numbers on it and say what keeps hands out of the line of the cut.
More from the shop
You may also need
GOINGMAKE Compact Miter Gauge, 14 in Fence
Short fence and bar for benchtop saws
TSMG5ULTRA
GOINGMAKE Professional Miter Gauge
Telescoping fence for long runs of panel crosscuts
0727B
GOINGMAKE Miter Gauge with 18 in Fence
Fixed fence and flip stop for repeat parts
0727A
GOINGMAKE Extendable Miter Gauge, 18 to 32 in
One gauge for short parts and wider boards